How to install Vcenter Operation Manager


Installation/Configuration of Vcenter Operation Manager

1)  Download the vcops ovf file from VMware site. Operation manager is only available in ovf format.

2)  Before deploying the vcops ovf file we have to create IP pools in vcenter server. Follow the steps below to do so

Select datacenter from vcenter server and click on IP pools:

vcops1

Under IP Pools click on add to add a new pool

vcops2

Enter a name for the pool. I have used vcops-pool in this example. In subnet give the network address and select appropriate subnet. Then enter your gateway configuration.

After this click on DNS tab and enter DNS related details and click on ok

vcops3

You have to associate your IP pools to your corresponding network. To do so click on association tab and select your network as shown below:

vcops4

Now your IP pools have been configured. Remember do not click on enable IP pool while creating the pool.Now your screen would look like as below.

vcops5

You are ready to deploy vcenter operation manager now.

Click on file and then select deploy ovf template

vcops6

vcops7

Give path of your ovf file and select next and then accept the license agreement. Give a appropriate name for your vapp. I had used vCenter Operations Manager in this case

vcops8

Depending upon your environment select small, medium or large from configuration screen.

vcops9

I had used small in my case.

Now select the host/cluster on which you want to deploy your vapp.

vcops10

Select thick/thin provision space for deploying your vapp. I have used thin provisioned in my example due to storage constraints:

vcops11

Make sure in networking mapping screen destination networks shows the name to which you have associated your IP pools in above steps:

vcops12

In IP allocation policy choose fixed. Do not ever use transient. Once you have assigned IP to your vapps vm’s do not change it (best practice).

vcops13

In next screen choose your time zone and assign IP to your UI and Analytic VM.

vcops14

Click on finish and  your deployment will start as shown below.

vcops15

After your vapp is successfully deployed click on power on vapp. The vapp consists of 2 vm’s Do not try to start/stop individual vm’s. Always start/stop the vapp.

vcops16

Vapp will first power on analytics vm then UI vm.

vcops17

When both the vm’s are powered on select the vcop vapp and select the tab summary. You will find available written there. Click on available and it will take you to web browser login. The default password is admin/admin.

vcops18

vcops19

Now login onto the vcops GUI. On the very first screen it will ask you to enter the details of the vcenter server which you want to register with vcops.

vcops20

On the next screen it will tell you to change the password of admin and root user. The default password for admin user is admin and for root user is vmware.

After changing the first time passwords it will take you to next screen where it will ask you to enter details of the vcenter server which you want to monitor.

vcops21

You can leave the collector username and password field blank. After this just click next next

vcops22

vcops23

After registration it will take you to admin page where you can configure other details.

vcops24

Click on SMTP/SNMP tab. Here you can set the email id which vcops will use to send mails in case of any errors/warning in vcenter environment.

After this go to your browser and type the ip address of your UI vm and click enter. It will redirect you to page as shown below.

vcops25

After login it will show you following screen.

vcops26

With this your vcenter operation manager installation/configuration is complete.

 

About Alex Hunt

Hi All I am Manish Kumar Jha aka Alex Hunt. I am currently working in VMware Software India Pvt Ltd as Operations System Engineer (vCloud Air Operations). I have around 5 Years of IT experience and have exposure on VMware vSphere, vCloud Director, RHEL and modern data center technologies like Cisco UCS and Cisco Nexus 1000v and NSX. If you find any post informational to you please press like and share it across social media and leave your comments if you want to discuss further on any post. Disclaimer: All the information on this website is published in good faith and for general information purpose only. I don’t make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information you find on this blog is strictly at your own risk. The Views and opinions published on this blog are my own and not the opinions of my employer or any of the vendors of the product discussed.
This entry was posted in Vmware and tagged , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s