Whats New in vSphere 6.0- Host Profile Enhancements


With vSphere 6.0 Vmware has enhanced so many features and host profile is one of them. Let’s refresh what host profile do. A plain simple definition of host profile is:

“Host Profiles allow you to configure standard configurations for your ESXi hosts and to automate compliance to these configurations, simplifying operational management of large-scale environments and reducing errors caused by misconfigurations”

hp

Two main features that are enhanced in vSphere v6.0 are:

Maintenance Mode Removal

Till release of vSphere 5.5 host profile required hosts to be put in maintenance mode before you can apply the profile. This can be a very inconvenient task when you are trying to change some configuration during normal business hours specially when the Host:VM consolidation ratio is high.

With vSphere 6.0 Vmware has made host profiles a bit intelligent. Now a host profile will require a host to be put into maintenance mode only if the configuration settings defined in host profile requires it.

Eeehhh sounds confusing !! ha. You might be thinking if the configuration settings still require host to be put into maintenance mode then what has been changed. The answer is simple.

Suppose you have included or added simple settings like defining NTP servers, Syslog server or SNMP configuration in your host profile then when you are trying to apply this profile to a host it will not ask you to put the host into maintenance mode because these settings don’t require any host reboot.

On the other hand if your host profile  has some configuration settings defined that can be applied to a host only on rebooting the host then definitely you will need to put host into maintenance mode.

No Dependency on Reference Host

Host Profiles relies on a ‘Reference Host’, a host that is properly configured’, from which profiles can be created and used against other like hosts. Till vSphere v5.5 if you are trying to apply a host profile to a host then it was a mandatory condition that the reference host should be online.

In vSphere 6.0 the dependency on reference host has been decreased and it will not stop you while applying host profile to a host even if the reference host is not available. The only disadvantage is that you will not be able to do a compliance check and hence can’t verify the configuration settings have been applied or not.

I guess above 2 are small changes only but can be very helpful in certain conditions.

If the above post is informational to you then hit Like and share it. Happy Learning !!!

About Alex Hunt

Hi All I am Manish Kumar Jha aka Alex Hunt. I am currently working in VMware Software India Pvt Ltd as Operations System Engineer (vCloud Air Operations). I have around 5 Years of IT experience and have exposure on VMware vSphere, vCloud Director, RHEL and modern data center technologies like Cisco UCS and Cisco Nexus 1000v and NSX. If you find any post informational to you please press like and share it across social media and leave your comments if you want to discuss further on any post. Disclaimer: All the information on this website is published in good faith and for general information purpose only. I don’t make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information you find on this blog is strictly at your own risk. The Views and opinions published on this blog are my own and not the opinions of my employer or any of the vendors of the product discussed.
This entry was posted in Vmware. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s